Math Is Fun Forum

Jai Ganesh

Administrator

Registered: 2005-06-28

Posts: 48,422

Hard Disk Drive

Hard Disk Drive

Summary

HDD stands for Hard Disk Drive. Hard disc, hard drive, and fixed disc are other names for HDD. A hard disc drive (HDD) is a type of data storage device that uses magnetic media to store digital information and rotational platters to retrieve it. Hard drives are the primary storage component of a computer system. Non-volatile memory is present in an electromechanical device. HDDs are used in computers, mobile devices, and consumer technology. They can store operating systems and vast systems of data as well.

Hard disc drives, in particular, regulate the read and write operations of the hard disc on which the files are stored. In a computer, HDDs are either implemented as the primary storage device or as a backup storage device.

They are frequently located in the drive bay and linked to the motherboard using cables in various formats, including Advanced Technology Attachment (ATA), Serial ATA, Parallel ATA, and Small Computer System Interface (SCSI). A power supply device is also linked to the HDD, allowing it to continue to save data even when the power is turned off.

Although a hard drive and a hard disc are distinct objects that are packed together as a unit, either terminology can be used to refer to the entire unit.

Details

A computer hard disk drive (HDD) is a non-volatile data storage device. Non-volatile refers to storage devices that maintain stored data when turned off. All computers need a storage device, and HDDs are just one example of a type of storage device.

HDDs are usually installed inside desktop computers, mobile devices, consumer electronics and enterprise storage arrays in data centers. They can store operating systems, software programs and other files using magnetic disks.

More specifically, hard disk drives control the reading and writing of the hard disk that provides data storage. HDDs are used either as the primary or secondary storage device in a computer. They are commonly found in the drive bay and are connected to the motherboard via an Advanced Technology Attachment (ATA), Serial ATA, parallel ATA or Small Computer System Interface (SCSI) cable, among other formats. The HDD is also connected to a power supply unit and can keep stored data while powered down.

A hard disk drive -- often shortened to hard drive -- and hard disk are not the same things, but they are packaged as a unit and either term can refer to the whole unit.

Why do computers need hard disks?

Storage devices like hard disks are needed to install operating systems, programs and additional storage devices, and to save documents. Without devices like HDDs that can retain data after they have been turned off, computer users would not be able to store programs or save files or documents to their computers. This is why every computer needs at least one storage device to permanently hold data as long as it is needed.

How do hard disk drives work?

Most basic hard drives consist of several disk platters -- a circular disk made of either aluminum, glass or ceramic -- that are positioned around a spindle inside a sealed chamber. The platter spins with a motor that is connected to the spindle. The chamber also includes the read/write heads that magnetically record information to and from tracks on the platters using a magnetic head. The disks also have a thin magnetic coating on them.

The motor spins the platters at up to 15,000 rotations per minute. As the platters spin, a second motor controls the position of the read and write heads that magnetically record and read information on each platter.

Hard disk drive storage capacity

Some of the most common storage drive capacities include the following:

* 16 GB, 32 GB and 64 GB. This range is among the lowest for HDD storage space and is typically found in older and smaller devices.
* 128 GB and 256 GB. This range is generally considered an entry point for HDD devices such as laptops or computers.
* 500 GB, 1 TB and 2 TB. Around 500 GB and above of HDD storage is typically considered decent for an average user. Users can most likely store all their music, photos, videos and other files with this much space. Individuals with games that take up a lot of space should find 1 TB to 2 TB of HDD space suitable.
* More than 2 TB. Anything over 2 TB of HDD space is suitable for users who work with high-resolution files, who need to store or house a large amount of data, or who want to use that space for backup and redundancy.

Currently, the highest capacity HDD is 20 TB. However, an HDD actually has less space than advertised, as the operating system, file system structures and some data redundancy procedures use a portion of that space.

Hard drive components and form factors

Hard disk drive components include the spindle, disk platter, actuator, actuator arm and read/write head. Even though the term can refer to the unit as a whole, the term hard disk is the set of stacked disks -- in other words, the part of the HDD that stores and provides access to data on an electromagnetically charged surface.

The HDD form factor refers to the physical size or geometry of the data storage device. HDD form factors follow a set of industry standards that govern their length, width and height, as well as the position and orientation of the host interface connector. Having an industry-standard form factor helps determine a common compatibility with different computing devices.

The most common form factors for HDDs in enterprise systems are 2.5-inch and 3.5-inch -- also known as small form factor (SFF) and large form factor (LFF). The 2.5-inch and 3.5-inch measurements represent the approximate diameter of the platter within the drive enclosures.

While there are other form factors, by 2009, manufacturers discontinued the development of products with 1.3-inch, 1-inch and 0.85-inch form factors. The falling price of flash made these other form factors almost obsolete. It is also important to note that while nominal sizes are in inches, actual dimensions are specified in millimeters.

Many solid-state drives (SSDs) are also designed for the HDD form factor. SSDs that fit into the same slots as HDDs generally use the SATA or serial-attached SCSI (SAS) interface to transfer data to and from the host computing system.

What are external HDDs?

Most HDDs are found internally in a computer and work as stated above. However, individuals can also purchase external hard drives. External hard drives can be used to expand the storage capacity of a computer or to act as a portable device to back up data. External drives connect to a computer or device through interfaces like USB 2.0, USB-C or with External SATA (eSATA). External hard drives may also have slower data transfer rates compared to internal HDDs.

The main advantage of an external hard drive, aside from being able to expand a device's storage space, includes being portable. Users can store data from multiple devices and physically bring that data with them wherever they go.

Common hard disk errors

Hard disks can fail for all sorts of reasons. However, failures generally fall into the following six broad categories.

* Electrical failure occurs when, for example, a power surge damages a hard disk's electronic circuitry, causing the read/write head or circuit board to fail. If a hard disk powers on but cannot read and write data or boot, it is likely that one or more of its components has suffered an electrical failure.
* Mechanical failure can be caused by wear and tear, as well as by a hard impact, like a hard drop. This may cause, among other things, the read/write drive head to hit a rotating platter, causing irreversible physical damage.
* Logical failure results when the hard disk's software is compromised or ceases to run properly. All sorts of data corruption can lead to a logical failure. This includes corrupted files, malware and viruses, improperly closing an application or shutting down a computer, human error or accidentally deleting files that are critical to hard disk functionality.
* Bad sector failure can occur when the magnetic media on a hard disk's rotating platter is misaligned, resulting in a specific area on the platter becoming inaccessible. Bad sectors are common and often limited when they occur. Over time, however, the number of bad sectors can increase, eventually leading to a system crash, inaccessible files or the hanging or lagging of the operation of a hard disk.
* Firmware failure happens when the software that performs the maintenance tasks on a drive and enables the hard disk to communicate with a computer becomes corrupted or stops working properly. This type of failure can lead to the disk freezing during bootup or the computer a hard disk is connected to not recognizing or misidentifying it.
* Multiple unknown failures that accumulate over time can also occur. For example, an electrical problem could lead to a mechanical failure, such as a read/write head crash. It might also lead to a logical failure, resulting in several bad sectors developing on the hard disk platters.

History of hard disk drives

The hard disk was created in 1953 by engineers at IBM who wanted to find a way to provide random access to high capacities of data at a low cost. The disk drives developed were the size of refrigerators, could store 3.75 MB of data and began shipping in 1956. Memorex, Seagate Technology and Western Digital were other early vendors of hard disk drive technology.

Hard disk drive form-factor size has continued to decrease as the technology evolves. By the mid-1980s, 3.5-inch and 2.5-inch form factors were introduced and became a standard in personal computers.

Hard disk drive density has increased since the technology was first developed. The first hard disk drives could store megabytes of data, while today their storage capacity is in the terabyte range. Hitachi Global Storage Technologies (HGST) -- now a Western Digital brand -- released the first 1 TB hard drives in 2007. In 2015, HGST announced the first 10 TB hard drive. And in 2021, Western Digital unveiled two 20 TB HDDs.

Additional Information

A hard disk drive (HDD), hard disk, hard drive, or fixed disk, is an electro-mechanical data storage device that stores and retrieves digital data using magnetic storage with one or more rigid rapidly rotating platters coated with magnetic material. The platters are paired with magnetic heads, usually arranged on a moving actuator arm, which read and write data to the platter surfaces. Data is accessed in a random-access manner, meaning that individual blocks of data can be stored and retrieved in any order. HDDs are a type of non-volatile storage, retaining stored data when powered off. Modern HDDs are typically in the form of a small rectangular box.

Hard disk drives were introduced by IBM in 1956, and were the dominant secondary storage device for general-purpose computers beginning in the early 1960s. HDDs maintained this position into the modern era of servers and personal computers, though personal computing devices produced in large volume, like mobile phones and tablets, rely on flash memory storage devices. More than 224 companies have produced HDDs historically, though after extensive industry consolidation, most units are manufactured by Seagate, Toshiba, and Western Digital. HDDs dominate the volume of storage produced (exabytes per year) for servers. Though production is growing slowly (by exabytes shipped[6]), sales revenues and unit shipments are declining, because solid-state drives (SSDs) have higher data-transfer rates, higher areal storage density, somewhat better reliability, and much lower latency and access times.

The revenues for SSDs, most of which use NAND flash memory, slightly exceeded those for HDDs in 2018. Flash storage products had more than twice the revenue of hard disk drives as of 2017. Though SSDs have four to nine times higher cost per bit, they are replacing HDDs in applications where speed, power consumption, small size, high capacity and durability are important. As of 2019, the cost per bit of SSDs is falling, and the price premium over HDDs has narrowed.

The primary characteristics of an HDD are its capacity and performance. Capacity is specified in unit prefixes corresponding to powers of 1000: a 1-terabyte (TB) drive has a capacity of 1,000 gigabytes, where 1 gigabyte = 1 000 megabytes = 1 000 000 kilobytes (1 million) = 1 000 000 000 bytes (1 billion). Typically, some of an HDD's capacity is unavailable to the user because it is used by the file system and the computer operating system, and possibly inbuilt redundancy for error correction and recovery. There can be confusion regarding storage capacity, since capacities are stated in decimal gigabytes (powers of 1000) by HDD manufacturers, whereas the most commonly used operating systems report capacities in powers of 1024, which results in a smaller number than advertised. Performance is specified as the time required to move the heads to a track or cylinder (average access time), the time it takes for the desired sector to move under the head (average latency, which is a function of the physical rotational speed in revolutions per minute), and finally, the speed at which the data is transmitted (data rate).

The two most common form factors for modern HDDs are 3.5-inch, for desktop computers, and 2.5-inch, primarily for laptops. HDDs are connected to systems by standard interface cables such as SATA (Serial ATA), USB, SAS (Serial Attached SCSI), or PATA (Parallel ATA) cables.

---

It appears to me that if one wants to make progress in mathematics, one should study the masters and not the pupils. - Niels Henrik Abel.

Nothing is better than reading and gaining more and more knowledge - Stephen William Hawking.